Freitag, 31. Juli 2009

Fire!

This is the old-school fire effect from the 90's, rendered in OpenGL. It uses a combination of Buffer Feedback and Palette rendering, both implemented in GLSL.



Quite a few things that I deemed infeasible to implement back then are easily possible in todays GC's, among them: dynamic convolution patterns, interpolation, correct side-to-side wrapping (clamp vertically, but wrap horizontally), arbitrary "fire pixel size". The example doesn't demonstrate this though.

It even should be possible to distort the fire eg. to flow around objects, by simply not drawing a simple square in the blur/displace step but something else. However, due to the exponential nature of feedback processes, one ends up with bizarrely distorted images frequently.

It appeared necessary to use two textures, since you don't want to be overwriting the texture you're reading from. However, I'm not aware if render-to-texture would overwrite a texture while you're rendering instead of dumping all changes from a frame buffer after rendering. I don't even know if this is specified


# Pygame/PyopenGL example by Bastiaan Zapf, Jul/Aug 2009

# render a fire effect via blurring and displacing feedback
# (similar to video feedback)

# this effect was ubiquitous in the 90's, often used in
# cracker's intros, demos and the like

from OpenGL.GL import *
from OpenGL.GLU import *

from OpenGL.GL.ARB.framebuffer_object import *
from OpenGL.GL.EXT.framebuffer_object import *

from ctypes import *

from math import *
import pygame
import random
import screenshot
import time
import numpy # for black textures
from shaderlib import *

pygame.init()

screenx=400
screeny=300

pygame.display.set_mode((screenx,screeny), pygame.OPENGL|pygame.DOUBLEBUF)

glClearColor(0.0, 0.0, 0.0, 1.0)
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT)

# Create and Compile fragment and vertex shaders

# Texturing

vertex_shader=createAndCompileShader(GL_VERTEX_SHADER,"""
varying vec3 v;
varying vec3 N;

void main(void)
{

v = gl_ModelViewMatrix * gl_Vertex;
N = gl_NormalMatrix * gl_Normal;

gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex;
gl_TexCoord[0]=gl_TextureMatrix[0] * gl_MultiTexCoord0;
}
""");

# Convolution shader - this is the Code that implements
# the blur between two frames
# this will be expensive.

fire_shader=createAndCompileShader(GL_FRAGMENT_SHADER,"""

const int MaxKernelSize=25;
uniform vec3 OffsetWeight[MaxKernelSize];
uniform int KernelSize;
uniform sampler2D BaseImage;
varying vec3 N;
varying vec3 v;

void main(void)
{
int i;
vec4 sum=vec4(0.0);
for (i=0;i<KernelSize;i++) {
sum+=texture2D(BaseImage,gl_TexCoord[0].st+OffsetWeight[i].st)*OffsetWeight[i].z;
}
gl_FragColor=sum;
}
""");

# build fire shader program

fire_program=glCreateProgram()
glAttachShader(fire_program,vertex_shader)
glAttachShader(fire_program,fire_shader)
glLinkProgram(fire_program)

# reference the shader variables

locOW = glGetUniformLocation(fire_program,"OffsetWeight");
locKS = glGetUniformLocation(fire_program,"KernelSize");
locBI = glGetUniformLocation(fire_program,"BaseImage");

# try to activate/enable shader program
# handle errors wisely

try:
glUseProgram(fire_program)
except OpenGL.error.GLError:
print glGetProgramInfoLog(fire_program)
raise


# Monochrome to fire colors shader

color_shader=createAndCompileShader(GL_FRAGMENT_SHADER,"""

const int MaxKernelSize=25;
uniform sampler2D BaseImage;
varying vec3 N;
varying vec3 v;

void main(void)
{
int i;
vec4 sum=vec4(0.0);
sum=texture2D(BaseImage,gl_TexCoord[0].st+vec2(0,0));

if (sum.x<0.1) {
gl_FragColor=vec4(0.0,0.0,0.0,0.0);
} else if (sum.x<0.2) {
gl_FragColor=vec4((sum.x-0.1)*10.0,0.0,0.0,0.0);
} else if (sum.x<0.3) {
gl_FragColor=vec4(1.0,(sum.x-0.2)*10.0,0.0,0.0);
} else if (sum.x<0.4) {
gl_FragColor=vec4(1.0,1.0,(sum.x-0.3)*10.0,0.0);
} else {
gl_FragColor=vec4(1.0,1.0,1.0,0.0);
}
}
""");



colors_program=glCreateProgram()
glAttachShader(colors_program,vertex_shader)
glAttachShader(colors_program,color_shader)
glLinkProgram(colors_program)

# try to activate/enable shader program
# handle errors wisely

try:
glUseProgram(colors_program)
except OpenGL.error.GLError:
print glGetProgramInfoLog(colors_program)
raise

# return to fire program to set variables

glUseProgram(fire_program);
glMatrixMode(GL_MODELVIEW);

# set a cheap convolution kernel of length 3

glUniform1i(locKS,3);
glUniform3fv(locOW,3,
[[ 0.001, 0.0 , 0.32],
[ -0.001, 0.0 , 0.32],
[ 0 , -0.001, 0.32],
]); # just some blur

glUniform1i(locBI,0); # we will be using the first texturing unit

# get a monochromatic texture of the size specified below - low resolution
# will mean large flames and cheap calculation

firew=64
fireh=64

texture=glGenTextures( 1 )

glBindTexture( GL_TEXTURE_2D, texture );
glTexEnvf( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE );
glTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_S,
GL_REPEAT);
glTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_T,
GL_REPEAT );
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR)
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR)

glTexImage2D(GL_TEXTURE_2D, 0,GL_LUMINANCE,
firew,fireh,0,GL_LUMINANCE,GL_FLOAT,numpy.zeros([firew,fireh,1],float))

glEnable( GL_TEXTURE_2D );
glBindTexture( GL_TEXTURE_2D, texture );


# generate another texture we render the fire to, and set parameters

newtexture=glGenTextures( 1 )

glBindTexture( GL_TEXTURE_2D, newtexture );
glTexEnvf( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE );
glTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_S,
GL_REPEAT );
glTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_T,
GL_REPEAT );
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR)
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR)

glTexImage2D(GL_TEXTURE_2D, 0,GL_LUMINANCE,firew,fireh,0,GL_LUMINANCE,
GL_FLOAT, numpy.zeros([firew,fireh,1],float))


# other choices for the texture wrapping options might be
# benefitial

done = False

t=0

# prepare a frame buffer object

fbo=c_uint(1) # WTF? Did not find a way to get there easier
# A simple number would always result in a "Segmentation
# Fault" for me

glGenFramebuffers(1,fbo)

while not done:

t=t+1

# rotation and displacement during fire blur

alpha=sin(t/73.0)

x=0
y=0.004+(cos(t/43.0)+1.0)/50.0

# render to texture (render next step of fire effect)

glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, fbo)

glFramebufferTexture2DEXT(GL_FRAMEBUFFER_EXT, GL_COLOR_ATTACHMENT0_EXT,
GL_TEXTURE_2D, newtexture, 0)

glPushAttrib(GL_VIEWPORT_BIT) # save viewport

glViewport(0, 0, firew, fireh) # set to fire effect dimensions

glUseProgram(fire_program) # use fire blur

# first draw blurred/displaced fire

glBindTexture( GL_TEXTURE_2D, texture )
glLoadIdentity()

glTranslatef(x,y,0)
glRotatef(alpha,0,0,1)

glBegin(GL_QUADS)

glTexCoord2f(0,0)
glVertex2f(-1,-1)
glTexCoord2f(1,0)
glVertex2f( 1,-1)
glTexCoord2f(1,1)
glVertex2f( 1, 1)
glTexCoord2f(0,1)
glVertex2f(-1, 1)

glEnd()

# then draw a few random pixels at the bottom to get the fire going

glUseProgram(0) # shaders interfer with pure pixel drawing

glBindTexture( GL_TEXTURE_2D, 0 ) # textures do so as well

for i in range(0,firew):
glRasterPos2f(-1+2*i/(firew+0.0),-0.999)
glDrawPixelsf(GL_LUMINANCE,[[[random.random()]]])

# restore viewport

glPopAttrib(GL_VIEWPORT_BIT)

# don't render to texture anymore

glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, 0)

# fire "palette"
glLoadIdentity()
glUseProgram(colors_program)
glBindTexture( GL_TEXTURE_2D, texture )

# draw fire once, however, clip noise from top and bottom

glBegin(GL_QUADS)

glTexCoord2f(0,0.03)
glVertex3f(-1,-1,0)
glTexCoord2f(1,0.03)
glVertex3f( 1,-1,0)
glTexCoord2f(1,0.97)
glVertex3f( 1, 1,0)
glTexCoord2f(0,0.97)
glVertex3f(-1, 1,0)

glEnd()

pygame.display.flip()

# flip textures

oldtexture=texture
texture=newtexture
newtexture=oldtexture

time.sleep(0.01)
t=t+1

2 Kommentare:

  1. where is shaderlib? how install it?

    AntwortenLöschen
  2. for people having trouble and asking how to run this sample, what I did is this:
    1.comment the line from shaderlib import *
    2.comment the line import screenshot
    3. on line 232 get rid of the second argument as this from glGenFramebuffers(1,fbo) to glGenFramebuffers(1)
    4.on line 291 get rid of the argument should read as this glPopAttrib()

    Last for it runs the author use a shaderlib, it is his own shader compile library but in his last examples he include that function so paste this function anywhere in the example and now it should run, of course you need pyopengl and pygame installed.(just check whitespaces pls).

    def createAndCompileShader(type,source):
    shader=glCreateShader(type)
    glShaderSource(shader,source)
    glCompileShader(shader)

    # get "compile status" - glCompileShader will not fail with
    # an exception in case of syntax errors

    result=glGetShaderiv(shader,GL_COMPILE_STATUS)

    if (result!=1): # shader didn't compile
    raise Exception("Couldn't compile shader\nShader compilation Log:\n"+glGetShaderInfoLog(shader))
    return shader

    AntwortenLöschen